Brake Hose Support Rubber

Wraps around hose and slots into bracket

 Sorry, this part is no longer available.

 17658260 GU17658260 17 65 82 60
 1765 8260 1765.8260 17.65.82.60

Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal

Make your Guzzi stand out from the crowd!

 This part is available by special order, request a quote

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Brembo PS 16 rear master cylinder for models with a remote reservoir, suitable as a replacement for the standard PS15 master cylinder which has now been discontinued by Brembo. Supplied with operating lever. Mounting holes at 50mm centres

Brembo ref. 10.2934.02 See BRA19500 for the elbow that the fluid supply pipe fits onto. Also see BRC19001 for a reconditioned PS15 MC

 This part is due back in stock soon, call 01484 841395 to reserve yours

 19667000 GU19667000 19 66 70 00
 1966 7000 1966.7000 19.66.70.00

Complete reproduction Brembo P2 F05 (P5) front left hand brake caliper for small twins (when mounted behind fork leg)

Supplied without brake pads, see BRA19724 if you require these. Also known as Guzzi ref. 19652336 NLA March 2020

 Availability varies on this part, check availability

 82037805 GU82037805 82 03 78 05
 8203 7805 8203.7805 82.03.78.05

Also fits Benelli 250 TS

Complete reproduction Brembo P2 F05 (P5) front right hand brake caliper for small twins (when mounted behind fork leg)

Supplied without brake pads, see BRA19724 if you require these. Also known as Guzzi ref. 19652336

 Availability varies on this part, check availability

 82037800 GU82037800 82 03 78 00
 8203 7800 8203.7800 82.03.78.00

Also fits Benelli 250 TS

Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models

Make your Guzzi stand out from the crowd!

 This part is available by special order, request a quote

 10430830 GU10430830 10 43 08 30
 1043 0830 1043.0830 10.43.08.30

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   This part is due back in stock soon, call 01484 841395 to reserve yours

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   This part is due back in stock soon, call 01484 841395 to reserve yours

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Front left hand brake pipe linking left hand caliper to fixed brakeline running to rear of bike

Original type rubber brakeline with chunky galvanized ends

 This part is available by special order, request a quote

14658850-z 14658850 GU14658850 14 65 88 50
 1465 8850 1465.8850 14.65.88.50

Front right hand brake pipe linking right hand caliper to undertank master cylinder. Check pipe length if your master cylinder has been upgraded to the V50 3 handlebar mounted type

Original type rubber brakeline with chunky galvanized ends

 This part is available by special order, request a quote

19657100-z 19657100 GU19657100 19 65 71 00
 1965 7100 1965.7100 19.65.71.00